Product Catalog

Subscriptions

Get mail on new products



Spray Dryer for Soy Protein SPG

Item Code:SPG Features:To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
  • Description

I. Features of material

Soy protein, or known as soya bean protein is not easy to be atomized due to its high viscosity. With normal high-speed centrifugal atomizer, it cannot be atomized well. With normal pressure spray dryer, the investment is highly increased because of its height. Furthermore, the feeding temperature of material is very high. As per these features, the combined spray dryer is specially designed: with drying tower of centrifugal spray type (short in height and big in diameter), centrifugal air inlet distribution (spiral case with hot air distributor), and pressure nozzle (centrifugal atomization result is not good, and the product is not instant soluble, so we choose atomization under high pressure). With this structure, the investment is much lower, meanwhile it can reach the relative requirements of the product.

 

 

II. Features of structure

1. Type of spraying: It adopts pressure spray drying. The homogenizer is modified as high-pressure pump to provide high pressure.

2. Discharge type: The final products are collected from cyclone separator, not from the bottom of drying tower. As the fluidity of soy protein powder is not good, and it is easy to be stuck onto the conical part of drying tower, the chain scraper should be installed at conical part to scrape off the powder stuck there. The collected products will be sent to packing room pneumatically, and cooled to around room temperature during pneumatic transportation.

3. This kind of drying method could protect the active ingredient of soy protein powder from being damaged.

4. Multi nozzles are utilized for spraying system. To avoid cross contact of the sprayed mist, the spraying area of nozzles are specially designed as semi-circular structure, and the high pressure nozzles are normally US brands.

5. To avoid over pressure of the drying tower, there is a vacuum protection device at air inlet.

6. The hot air distributor manufactured based on specialized technology. To avoid deviation of air velocity, the hot air distributor is divided into multiple air inlet with control valve at each air inlet to make the hot air uniformly and spirally goes into drying tower, which could ensure the effective utilizing of heat and non-sticking of material on the wall.

 

Other Products

Product Name:
Spray Dryer for Chinese Traditional Medicine (Herb Medicine)
Model:
ZPG
Description:
To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
Product Name:
Closed Cycle Spray Dryer
Model:
XLP
Description:
To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
Product Name:
Pressure Spray Dryer
Model:
YPG
Description:
To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
Product Name:
Air Stream Spray Dryer
Model:
QPG
Description:
To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
Product Name:
Asepsis Spray Dryer
Model:
WPG
Description:
To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
Product Name:
High Speed Centrifugal Spray Dryer
Model:
LPG
Description:
To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
Product Name:
High Speed Centrifugal Spray Congealer
Model:
ZLZ
Description:
To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
Product Name:
Pressure Spray Congealer
Model:
YPL
Description:
To melt the material, like wax, PE wax, resin, etc. To cool the air and enter into the spray tower, To feed and spray the melted liquid into spray tower, The melted material liquid contact with the cold air and will be solidified small round particles/round granulaes.
more